PARAMUser parameter · TURNING (TC)
TC54
Cut depth per cycle for machining inside diameter in bar machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Cut depth per cycle for machining inside diameter in bar machining unit
Inside diameter enlarging cycle Cutting is promoted gradually from the edge, cf. Standard inside diameter cutting
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 333. Reference and explanation only — not a reproduction of the manual.