What is the setting range of Mazak parameter TC57?

0 to 65535. A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC57

Workpiece pressing speed in workpiece transfer unit

Q: What does Mazak parameter TC57 do?

TC57 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Workpiece pressing speed in workpiece transfer unit. Example : Workpiece transferred from No. 1 spindle to No. 2 spindle Set this parameter equal to or as close as possible to its standard value. Excessive setting may cause a contact error. (TC44, TC59)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Example : Workpiece transferred from No. 1 spindle to No. 2 spindle Set this parameter equal to or as close as possible to its standard value. Excessive setting may cause a contact error. (TC44, TC59)

Setting

Setting range0 to 65535

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 334. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →