PARAMUser parameter · TURNING (TC)
TC6
Deceleration rate in down-going wall slope (90°) for rough cutting in bar machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Deceleration rate in down-going wall slope (90°) for rough cutting in bar machining unit
F : Feed rate for rough cutting F = F × 3 1 This is effective only when (bit 1) = 1.
Setting
Setting range0 to 500
Unit%
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 318. Reference and explanation only — not a reproduction of the manual.