What is the setting range of Mazak parameter TC61?

0 to 7. A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC61

Simultaneous operation pattern for transfer

Q: What does Mazak parameter TC61 do?

TC61 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Simultaneous operation pattern for transfer. Simultaneous operation pattern for transfer of workpieces between two unit jobsites TC61 = 1: Rotation of the spindle and movement of the Z-axis TC61 = 2: Orientation of the spindle and movement of the Z-axis TC61 = 4: Positioning of the C-axis and movement of the Z-axis Note : To combine patterns, set the sum total of setting numbers corresponding the conditions.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Simultaneous operation pattern for transfer of workpieces between two unit jobsites TC61 = 1: Rotation of the spindle and movement of the Z-axis TC61 = 2: Orientation of the spindle and movement of the Z-axis TC61 = 4: Positioning of the C-axis and movement of the Z-axis Note : To combine patterns, set the sum total of setting numbers corresponding the conditions.

Setting

Setting range0 to 7

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 335. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →