What is the setting range of Mazak parameter TC64?

0 to 65535 (unit: 0.01 s). A changed value takes effect: After stop of movement.

PARAMUser parameter · TURNING (TC)

TC64

Amount of relief after transfer using the workpiece transfer unit (Spindle mode 6 and 7)

Q: What does Mazak parameter TC64 do?

TC64 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of relief after transfer using the workpiece transfer unit (Spindle mode 0 to 5). Set the amount of relief after executing the workpiece transfer unit. Example : Transfer from HD2 to HD1 Spindle No. 1 Spindle No. 2

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Amount of relief after transfer using the workpiece transfer unit (Spindle mode 0 to 5)

Set the amount of relief after executing the workpiece transfer unit. Example : Transfer from HD2 to HD1 Spindle No. 1 Spindle No. 2

Setting

Setting range0 to 65535

Unit0.01 s

Program typeM

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 338. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →