What is the setting range of Mazak parameter TC65?

0 to 255. A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC65

Specification of first M-code for parts catcher control

Q: What does Mazak parameter TC65 do?

TC65 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Specification of first M-code for parts catcher control. It is a parameter to automatically control the parts catcher. If the set value of TC65 is n, M-code of No. n (parts catcher forward) is outputted at the start of cutting off (#4, #5), and M-code of No. n+1 (Parts catcher backward) is outputted at the end. Note : If 0 is set in TC65 no M-code is outputted.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

It is a parameter to automatically control the parts catcher. If the set value of TC65 is n, M-code of No. n (parts catcher forward) is outputted at the start of cutting off (#4, #5), and M-code of No. n+1 (Parts catcher backward) is outputted at the end. Note : If 0 is set in TC65 no M-code is outputted.

Setting

Setting range0 to 255

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 338. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →