What is the setting range of Mazak parameter TC66?

0 to 3599 (unit: 0.1°). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC66

Minimum index angle of the FLASH tool

Q: What does Mazak parameter TC66 do?

TC66 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum index angle of the FLASH tool. This parameter is used as the basis for judging whether the index angle entered in TOOL DATA display is acceptable. An alarm will be displayed if the entered value is judged to be unacceptable. (Specify “900” for 4-segment splitting.)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used as the basis for judging whether the index angle entered in TOOL DATA display is acceptable. An alarm will be displayed if the entered value is judged to be unacceptable. (Specify “900” for 4-segment splitting.)

Setting

Setting range0 to 3599

Unit0.1°

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 338. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →