PARAMUser parameter · TURNING (TC)
TC67
Return distance (radial value) in X-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Return distance (radial value) in X-axis at wall during rough cutting in bar cutting unit, in corner machining unit or in mill-turning unit of MAZATROL programs
Example : 1. Standard type cutting Prior to cutting up along the wall in the end of final cycle, escape will be made by specified distance. 2. High speed rough cutting Escape will be made by TC67 and TC68 specified distance during return after reaching the wall. * For EIA/ISO programs (fixed cycle) refer to and SU102.
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 339. Reference and explanation only — not a reproduction of the manual.