What is the setting range of Mazak parameter TC69?

0 to 255 (unit: Revolutions). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC69

Number of revolutions during dwell for pecking of grooving

Q: What does Mazak parameter TC69 do?

TC69 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of revolutions during dwell for pecking of grooving. Set number of revolutions during dwell for each cutting operation for machining #0, #1, #2, #3, #4, or #5 groove (T. GROOVE unit) with pecking return distance (TC74) of 0. The tool stops moving until the spindle makes revolutions set in this parameter.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set number of revolutions during dwell for each cutting operation for machining #0, #1, #2, #3, #4, or #5 groove (T. GROOVE unit) with pecking return distance (TC74) of 0. The tool stops moving until the spindle makes revolutions set in this parameter.

Setting

Setting range0 to 255

UnitRevolutions

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 339. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →