What is the setting range of Mazak parameter TC70?

0 to 99 (unit: Number of cutting edges). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC70

FLASH tool — Number of cutting edges to be used for the tool not registered in the tool file

Q: What does Mazak parameter TC70 do?

TC70 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). FLASH tool — Number of cutting edges to be used for the tool not registered in the tool file. Number of cutting edges to be used if the tool file data for the corresponding tool is not yet registered during FLASH tool selection.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Number of cutting edges to be used if the tool file data for the corresponding tool is not yet registered during FLASH tool selection.

Setting

Setting range0 to 99

UnitNumber of cutting edges

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 339. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →