What is the setting range of Mazak parameter TC71?

0 to 65535 (unit: Revolutions). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC71

Feed stopping rotation dwell time during the chip cutting cycle

Q: What does Mazak parameter TC71 do?

TC71 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed stopping rotation dwell time during the chip cutting cycle (valid only for roughing). Specify the feed stopping rotation dwell time during the chip cutting cycle. Feed is stopped while the spindle rotates for the specified time. Note : If “0” is entered, the dwell time will be handled as “0”. However, the feed rate will be reduced since the dwell function itself will be executed.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Feed stopping rotation dwell time during the chip cutting cycle (valid only for roughing)

Specify the feed stopping rotation dwell time during the chip cutting cycle. Feed is stopped while the spindle rotates for the specified time. Note : If “0” is entered, the dwell time will be handled as “0”. However, the feed rate will be reduced since the dwell function itself will be executed.

Setting

Setting range0 to 65535

UnitRevolutions

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 340. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →