What is the setting range of Mazak parameter TC77?

0 to 255 (unit: Lead/10). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC77

Acceleration distance clamp value for thread cutting unit

Q: What does Mazak parameter TC77 do?

TC77 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Acceleration distance clamp value for thread cutting unit. L : Effective thread length L: Acceleration distance 0 If L > TC77, alarm will be caused. 0 If, however, (bit 2) = 0, alarm will not be caused. (TC141 (bit 2))

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

L : Effective thread length L: Acceleration distance 0 If L > TC77, alarm will be caused. 0 If, however, (bit 2) = 0, alarm will not be caused. (TC141 (bit 2))

Setting

Setting range0 to 255

UnitLead/10

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 341. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →