What is the setting range of Mazak parameter TC8?

0 to 100 (unit: 0.1%). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC8

Acceleration pitch error ratio in thread cutting unit

Q: What does Mazak parameter TC8 do?

TC8 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Acceleration pitch error ratio in thread cutting unit. Used to calculate acceleration distance in thread cutting unit T C 8 T C 8 L = L – n ( ) – 1 + 0 1 0 0 0 1 0 0 0 L : Acceleration distance L : Distance over which feed rate become constant 0

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Used to calculate acceleration distance in thread cutting unit T C 8 T C 8 L = L – n ( ) – 1 + 0 1 0 0 0 1 0 0 0 L : Acceleration distance L : Distance over which feed rate become constant 0

Setting

Setting range0 to 100

Unit0.1%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 318. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →