What is the setting range of Mazak parameter TC80?

0, 29, 30, 55, 60, 80 (unit: °). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC80

Angle of the tool nose during the G276/G76 mode

Q: What does Mazak parameter TC80 do?

TC80 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Angle of the tool nose during the G276/G76 mode. If, during the composite-type fixed cycle G276/G76 mode, a tool nose angle has not been specified in the program, the setting of this parameter will become the angle of the tool nose. The setting must be either 0, 29, 30, 55, 60 or 80.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

If, during the composite-type fixed cycle G276/G76 mode, a tool nose angle has not been specified in the program, the setting of this parameter will become the angle of the tool nose. The setting must be either 0, 29, 30, 55, 60 or 80.

Setting

Setting range0, 29, 30, 55, 60, 80

Unit°

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 52, 342. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →