What is the setting range of Mazak parameter TC82?

0 to 40 (unit: Lead/10). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC82

Chamfering data calculation coefficient in thread cutting unit and thread cutting cycle (G276/G292, G76/G92)

Q: What does Mazak parameter TC82 do?

TC82 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Chamfering data calculation coefficient in thread cutting unit and thread cutting cycle (G276/G292, G76/G92). End point L : Effective thread length L : Same pitch incomplete thread length (follow-up delay) 1 L : Chamfering data 2 ψ : Chamfering angle L = L × 2 0 10 L : Thread lead 0

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

End point L : Effective thread length L : Same pitch incomplete thread length (follow-up delay) 1 L : Chamfering data 2 ψ : Chamfering angle L = L × 2 0 10 L : Thread lead 0

Setting

Setting range0 to 40

UnitLead/10

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 343. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →