What is the setting range of Mazak parameter TC83?

0 to 65535 (unit: Times). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC83

Number of cutting operations to be performed on finishing allowance corresponding to standard pattern (#0) of threading unit

Q: What does Mazak parameter TC83 do?

TC83 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Number of cutting operations to be performed on finishing allowance corresponding to standard pattern (#0) of threading unit. During a finishing process based on the standard pattern (#0) of the threading unit, TC78 cutting (final cutting diameter in threading unit) is repeated the number of times that has been specified in TC83. TC83 = 0 or 1: Cutting based on the setting of TC78 occurs once. TC83  2: Finish-cutting is repeated the number of times specified in TC83, and with the depth-of-cut setting of TC78/TC83.  Parameter TC83 is valid only for #0, #0: it does not function for #1, #1 or #2, #2. If TC78 = 0, TC83 is invalid.  For thread refinishing, one cutting operation is performed as before.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

During a finishing process based on the standard pattern (#0) of the threading unit, TC78 cutting (final cutting diameter in threading unit) is repeated the number of times that has been specified in TC83. TC83 = 0 or 1: Cutting based on the setting of TC78 occurs once. TC83  2: Finish-cutting is repeated the number of times specified in TC83, and with the depth-of-cut setting of TC78/TC83. <Supplementary description>  Parameter TC83 is valid only for #0, #0: it does not function for #1, #1 or #2, #2. If TC78 = 0, TC83 is invalid.  For thread refinishing, one cutting operation is performed as before.

Setting

Setting range0 to 65535

UnitTimes

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 53, 343. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →