What is the setting range of Mazak parameter US39?

0 to 999 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · DISPLAY STRUCTURE (US)

US39

Automatic determination of cutting conditions Element that automatically determines “FR” (DRILL)

Q: What does Mazak parameter US39 do?

US39 is a User parameter in the DISPLAY STRUCTURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Automatic determination of cutting conditions Element that automatically determines “FR” (DRILL). When determining “FR” automatically using the automatic cutting condition determination function, adjust the calculated feed rate according to the cutting power. Enabled when “DRILL” is set for the tool name in the tool sequence for point machining.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

When determining “FR” automatically using the automatic cutting condition determination function, adjust the calculated feed rate according to the cutting power. Enabled when “DRILL” is set for the tool name in the tool sequence for point machining.

Setting

Setting range0 to 999

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 57, 379. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →