PARAMUser parameter · DISPLAY STRUCTURE (US)
US42
Automatic determination of cutting conditions Reference shank diameter (BAR, CPY, CORNER)
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Automatic determination of cutting conditions Reference shank diameter (BAR, CPY, CORNER)
When determining “DEP-1” automatically using the automatic cutting condition determination function, adjust the depth of cut during I.D. machining. Enabled when “IN” or “IN INNER (BAK)” is set for the machining section in the tool sequence for a “BAR”, “CPY” or “CORNER” unit. DEP-1 = R-MAX-DEPTH (CUTTING CONDITION display) WORKPIECE MATERIAL PERCENTAGE_R-DEPTH% (CUTTING CONDITION display) TOOL MATERIAL PERCENTAGE_R-DEPTH% (CUTTING CONDITION display) (WIDTH (TOOL DATA) / US42 (reference shank diameter))
Setting
Setting range0 to 100
Unitmm/0.1 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 379. Reference and explanation only — not a reproduction of the manual.