PARAMUser parameter · DISPLAY STRUCTURE (US)
US45
Automatic determination of cutting conditions Tool nose angle when tool data is not input (BAR, CPY, CORNER and FACING)
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Automatic determination of cutting conditions Tool nose angle when tool data is not input (BAR, CPY, CORNER, FACING)
When determining “DEP-1” automatically using the automatic cutting condition determination function, determine the condition by using US45 as the tool nose angle if “EDG-ANG” is not input for the specified tool. Enabled when a “BAR”, “CPY”, “CORNER” or “FACING” unit is selected. Note : US45 is enabled only when US1 bit 1 = 1.
Setting
Setting range0 to 1000
Unit0.1°
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 58, 380. Reference and explanation only — not a reproduction of the manual.