What is the setting range of Mazak parameter US46?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · DISPLAY STRUCTURE (US)

US46

Automatic determination of cutting conditions Tool nose width when tool data is not input (T.GROOVE)

Q: What does Mazak parameter US46 do?

US46 is a User parameter in the DISPLAY STRUCTURE group of the MAZATROL SmoothX control (INTEGREX e-670H). call Automatic determination of cutting conditions Tool nose width when tool data is not input (T.GROOVE). When determining “FR” automatically using the automatic cutting condition determination function, determine the condition by using US46 as the tool nose width if “TIP-WID” is not input for the specified tool. Enabled when a “T.GROOVE” unit is selected. Note : US46 is enabled only when US1 bit 1 = 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

call Automatic determination of cutting conditions Tool nose width when tool data is not input (T.GROOVE)

When determining “FR” automatically using the automatic cutting condition determination function, determine the condition by using US46 as the tool nose width if “TIP-WID” is not input for the specified tool. Enabled when a “T.GROOVE” unit is selected. Note : US46 is enabled only when US1 bit 1 = 1.

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 58, 380, 381. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →